imapt

solisposttopcap

Solar range technical specification

The following details apply to all products within the solar range including the solarpost, the solarstreet light and the solarposter case.

KEY FEATURES

  • Zero energy costs
  • Solar energy harvested from four vertical faces totalling 102,300mm2
  • Lead acid battery with a lifetime of up to 5 years.
  • High performance white LED 180 lumens per watt with 71° beam.
  • 14 Days autonomy (without daylight)
  • 20 Days battery life in transport mode
  • PIR sensors trigger LED bright-up on approach

Solar range control system

The solar range control system uses a four channel dynamic boost algorithm to maximise the power generated from each individual solar panel. During the day the light tracks across the unit, illuminating and shading the panels. To capture energy efficiently from direct and indirect sunlight, the optimum power point of the panels is calculated in real time and the charge taken from the panels is adjusted, harvesting the maximum power from each panel.

The battery is charged throughout the day from the energy harvested from the solar panels. The solar range control system has battery management technology which mitigates full discharge by reducing the LED brightness till there is sufficient ambient light to charge. To maintain battery levels during transportation a low power mode can be initiated by briefly placing a magnet against the unit, once installed the magnet is used again to activate ready for use.

The solar range control system monitors the ambient light levels, anticipating the transition from day to night. The automatic transition allows for seasonal changes in light levels. During the night a high efficiency 180 lumens-per-watt white LED illuminates. The brightness of the LED is regulated by a pulse-width-modulation driver circuit, the LED remains at a low light level until activated by the passive infrared (PIR) sensors. The PIR sensors have a detection range of up to 5m, on approach the LED brightens for 10 seconds, gently dimming to the low level.
The Solispost control unit is fully sealed and uses IPX7 connectors.

Solar panels specification

Power: 17.2W (4 x 4.3W panels)
Material: Polycrystalline Silicon
Construction: Photovoltaic cells sealed behind UV stabilised tempered glass
Total Area: 102,300mm²

Battery specification

Type: AGM VRLA – Lead Acid Battery
Capacity: 6V 10Ah
Lifetime: up to 5 years at 20°C
Operating Temperature: -20 to +60°C
Transportation: Meets all requirements of the International Air Transport Association (I.A.T.A Dangerous Goods Regulations).
Low maintenance
Excellent recovery from deep discharge
Conforms to BS EN61056-1 and IEC1056-1 regulations

Light emitting diode (LED) specification

Colour Temperature: 3700K to 5000K
CRI: 75
Max Current: 520mA
Max LED Power: 1.43W
180 lumens per watt

PIR sensors specification

Type: Passive infrared sensor
Range: up to 5 metres
Detection Angle: 120°

Materials specification

Cap and lid Die-cast aluminium, to BS EN 755-2:2013
Post and chassis Extruded aluminium to BS EN 755-9:2001
Processing CNC machining with cutter heads using mineral-based coolant
IP rating 66 (ingress protection)

Large post dimensions

(all dimensions in mm)
large_post

Ground fixing options

ground_fitting

Download as PDF Download for Tablet